A. The user copied to a read-only folder share.
B. The user changed the attributes of the files.
C. The user copied the files from the local My Documents folder.
D. The user moved instead of copied the files.

A. Cable tester
B. Ohm meter
C. Field strength meter
D. PSU tester

A. The power cable was installed incorrectly and needs to be flipped.
B. The floppy drive was not enabled within the motherboard’s BIOS.
C. The FDD cable was installed incorrectly and needs to be flipped.
D. A Molex power cable was used instead of a Berg cable.

A. Remote Desktop
B. Telnet
C. Computer Management
D. Remote Assistance

A. DMZ is enabled.
B. MAC filtering is enabled.
C. WEP is being used.
D. SSID broadcast is disabled.

A. Install a USB serial adapter
B. Connect to a USB hub
C. Use an external modem
D. Use an Ethernet card

A. Cable tester
B. Power supply tester
C. Tone generator
D. Multimeter

A. Cable tester
B. Wrist strap
C. Multimeter
D. Loopback plug

A. Flathead screwdriver
B. Plastic shim
C. Metal shim
D. Pliers

A. Too much thermal paste was used on the processor and it is preventing boot.
B. The motherboard needs to have its PWD jumper removed before the first boot.
C. The motherboard needs to have the most recent BIOS version installed.
D. The motherboard needs to have a newer CMOS chip installed.

A. The hinge on the display panel is damaged.
B. The display cable is loose or damaged.
C. The display panel is defective.
D. The video controller on the system board is defective.