多项选择题X 纠错
A. Use of full duplex mode.
B. Creation of new collision domain.
C. Creation of new broadcast domain.
D. Addition of hub to the network.
E. Use of switches in the network.
F. Amount of ARP or IPX SAP traffic.
你可能喜欢
多项选择题
A. Transport layer divides a data stream into segments & adds reliability & flow control information
B. Data link layer adds physical source & destination address & an FCS to the segment
C. Packets are created when the network layer encapsulate a frame with source & destination host address& protocol related control information
D. Packets are created when the network layers adds layers 3 address & control information to a segment
E. The presentation layer translated bits into bits into voltages for transmission across the physical link
单项选择题
A. The Boot IOS Code is Located in the NVRAM.
B. Check NVRAM for boot system Commands.
C. Bypass NVRAM Configurations.
D. Boot the IOS Code Located in ROM.
E. Perform a Password Recovery.
F. Bypass The Code In ROM.
单项选择题
A. show CHAP authentication
B. show interface serial 0
C. debug PPP authentication
D. debug CHAP authentication
E. show PPP authentication CHAP
多项选择题
A. 205.7.8. 32/27
B. 191.168. 10. 2/23
C. 127.0.0.1
D. 224.0.0.10
E. 203.123.45. 47/28
F. 10.10.0.0/13
单项选择题
A. 64 network and 4 hosts
B. 4 network and 64 hosts
C. 2 network and 62 hosts
D. 62 network and 2 hosts
单项选择题
A.TE1
B.TE2
C.NT1
D.NT2
多项选择题
A. 199.141.27.33
B. 199.141.27.112
C. 199.141.27.119
D. 199.141.27.126
E. 199.141.27.175
F. 199.141.27.208
多项选择题
A. The switch name must match the workgroup name of the local network.
B. The switch must be configured with an IP address and default gateway.
C. The remote workstations must have access to the management VLAN of the switch.
D. CDP must be enabled on the switch so that it can be located by other devices on the network.
单项选择题
A. show access-list
B. show ip route
C. show ip interface
D. show interface
E. show interface list
F. show ip interface brief
单项选择题
A. To restart the router.
B. To bypass the configuration in NVRAM.
C. To view the lost password.
D. To save the changes to the configuration.
E. To enter ROM Monitor mode.
