A. point-to-point
B. broadcast multi-access
C. nonbroadcast multipoint
D. nonbroadcast multi-access
E. broadcast point-to-multipoint

A. Each ISDN B channel has transmission speeds of up to 64 kbps.
B. The ISDN B channel can carry video, voice or data.
C. The ISDN B channel transmission rate varies depending on the service used.
D. The ISDN D channel transmits control information.
E. The ISDN B channels can be configured with different subnets and encapsulation types when dialer profiles are configured.

A. Legacy DDR can use port information to define interesting traffic.
B. Legacy DDR can configure multiple dialer configurations on the same interface.
C. Legacy DDR can use ACLs to define interesting traffic.
D. HDLC or PPP can be used to encapsulate ISDN D channel information.
E. The BRI interfaces on ISDN routers with dialer profiles configured cannot belong to multiple dialer pools.
F. Dialer profiles cannot use extended ACLs to define interesting traffic.

A. 16kb/s
B. 64kb/s
C. 128kb/s
D. 144kb/s
E. 192kb/s
F. 256kb/s

A. PPP and ATM
B. PPP and SDLC
C. ATM and HDLC
D. SDLC and HDLC

A. X25
B. Frame Relay
C. ATM
D. ISDN
E. ATX
F. None of the above

A. TK1(config-if)# encapsulation hdlc ansi
B. TK1(config-if)# encapsulation ppp
C. TK1(config-if)# encapsulation LAPD
D. TK1(config-if)# encapsulation frame-relay ietf
E. TK1(config)#encapsulation ppp

A. HDLC
B. NCP
C. PAP
D. LAPD
E. LAPB
F. None of the above

A. Encapsulates several different types of routing protocols.
B. Supports only IP.
C. Can be used over analog circuits.
D. Is proprietary to Cisco
E. Supports error correction.

A. Ethernet
B. PPP
C. Token Ring
D. HDLC
E. Frame Relay
F. POTS

A. ISDN
B. Frame Relay
C. ATM
D. FDDI