You're working at TestKing as a ne...

单项选择题X 纠错

You're working at TestKing as a network administrator when your MCSE assistant calls you for help. He has attempted to configure Router TK1 and incorrectly configured the router interface with a subnet broadcast address. You have to correct this by first removing the incorrect IP address and then re-entering the first usable IP address of the same subnet.
How will you do this?（）

A.
B.
C.
D.
E.

参考答案：

进入题库练习

查答案就用赞题库小程序还有拍照搜题语音搜题快来试试吧

无需下载立即使用

你可能喜欢

单项选择题

While logged into a router, you wish to see the RIP routing updates in real time as they are sent and received. Which command would you issue to see these updates?（）

A. Show ip protocols
B. Show ip route rip
C. Debug ip rip
D. Debug ip updates
E. Debug ip transactions

点击查看答案进入题库练习

单项选择题

Which command displays EIGRP-related router activities as they occur?（）

A. TestKing# show ip route *
B. TestKing# debug eigrp route
C. TestKing# debug ip eigrp
D. TestKing# debug ip protocols eigrp
E. TestKing# show ip route eigrp

点击查看答案进入题库练习

单项选择题

The following was issues on router TestKingA:
TestKingA #show ip ospf neighbor
Neigbor ID PRI State Dead Time Address Interface
192.168.1.2 1 Full/- 00:00:37 192.168.1.2 Serial1
Which type of OSPF network will provide the output shown in the graphic?（）

A. FDDI
B. nonbroadcast multiaccess
C. broadcast multi-access
D. point-to-point

点击查看答案进入题库练习

单项选择题

TestKing.com has a large corporate network that uses multiple routing protocols.Hosts in a portion of the network that uses EIGRP have become unreachable.Which router command will allow you, the network technician, to view the status of these routes?（）

A. TestKing# show eigrp entries
B. TestKing# show protocols
C. TestKing# debug eigrp routes
D. TestKing# show ip route eigrp
E. TestKing# show route eigrp

点击查看答案进入题库练习

多项选择题

Which IOS commands can a network technician use to verify all RIP, IGRP,EIGRP, and OSPF routing protocol configurations?（）

A. debug ip routing
B. show running-config
C. show ip route protocols
D. show ip protocols
E. show protocols al

点击查看答案进入题库练习

单项选择题

Which command will display all the EIGRP feasible successor routes known to a router?（）

A. Router# show ip eigrp routes *
B. Router# show ip eigrp summary
C. Router# show ip eigrp topology
D. Router# show ip eigrp adjacencies
E. Router# show ip eigrp neighbors detail

点击查看答案进入题库练习

单项选择题

You try to add a new router into the established Testking OSPF network. The networks attached to the new router do not appear in the routing tables of the other OSPF routers.The new router was configured for OSPF in the following way:
Router(config)# router ospf 99
Router(config-if)# network 10.0.0.0 255.0.0.0 area 0
Based on this information, what is the most likely problem?（）

A. The process id is configured improperly.
B. The OSPF area is configured improperly.
C. The network wildcard mask is configured improperly.
D. The network number is configured improperly.
E. The AS is configured improperly.
F. The network subnet mask is configured improperly.
G. All of the above are likely problems.

点击查看答案进入题库练习

单项选择题

The following routes exist in the Testking router（）

A. R 12.18.8.0/24 [120/1] via 12.18.2., 00:00:10, Serial0
B. R 12.18.11.0/24 [120/7] via 12.18.9.1, 00:00:03, Serial1
C. C 12.18.1.0/24 is directly connected, Ethernet0
D. R 12.18.5.0/24 [120/15] via 12.18.2.2, 00:00:10, Serial0

点击查看答案进入题库练习

单项选择题

You are a network technician at TestKing, Inc. You are currently troubleshooting a routing issue on the Testking1 router. You issue the show ip route command. The output from the command is displayed in the following exhibit:
Which one of the following routes WILL NOT be entered into its neighboring routers routing table?（）

A. R 192.168.11.0/24 [120/7] via 192.168.9.1, 00:00:03, Serial1
B. C 192.168.1.0/24 is directly connected, Ethernet0
C. R 192.168.8.0/24 [120/1] via 192.168.2.2, 00:00:10, Serial0
D. R 192.168.5.0/24 [120/15] via 192.168.2.2, 00:00:10, Serial0
E. None of the above

点击查看答案进入题库练习

单项选择题

You are a network administrator at TestKing, Inc. and you're getting complaintsthat users on the TestKing2 Ethernet network can't access the TestKing1 site. Totroubleshoot this, you begin by looking at the Testking1 and Testking2 routerconfigurations as shown below:

Based on the above output, what is the underlying cause of this problem?（）

A. Link state routing protocol is missing.
B. Incorrectly configured IP addresses
C. IGRP is incorrectly configured.
D. Frame relay is not configured.
E. None of the above

点击查看答案进入题库练习

赞题库

赞题库-搜题找答案

（已有500万+用户使用）

历年真题
章节练习
每日一练
高频考题
错题收藏
在线模考
提分密卷
模拟试题

无需下载立即使用

手机版电脑版