Your network contains the servers conf...

单项选择题X 纠错

Your network contains the servers configured as shown in the following table. Name Server role Private IP address Public IP address Server1Routing and Remote Access server192.168.1.1 131.107.0.1 Web1 Web server 192.168.1.2 ? Your company is assigned the public IP addresses from 131.107.0.1 to 131.107.0.31.You need to ensure that Web1 is accessible from the Internet by using https://131.107.0.2.What should you do from the Routing and Remote Access console？（）

A. From the Static Routes node, configure a static route.
B. From the server properties, configure SSL Certificate Binding.
C. From the NAT interface, add an address pool and a reservation.
D. From the NAT interface, configure the Secure Web Server (HTTPS) service.

参考答案：

进入题库练习

查答案就用赞题库小程序还有拍照搜题语音搜题快来试试吧

无需下载立即使用

你可能喜欢

单项选择题

Your company has a main office and two branch offices that are connected by wan links. The main office runs the DNS service on three domain controllers. The zone for your domain is configure as an active directory-integrated zone.Each branch office has a single member server that hosts a secondary zone for the domain. The DNS servers in the branch offices use the main office DNS server as the DNS master server for the zone. You need to minimize DNS zone transfer ove r the WAN links. What should you do?（）

A.Decrease the retry interval setting in the start of authority (SOA) record for the zone
B.Decrease the refresh interval setting in the start of authority (SOA) record for the zone.
C.Increase the refresh interval setting in the start of authority (SOA) record for the zone.
D.Disable the netmask ordering in the properties of the DNS master serve for the zone.

点击查看答案进入题库练习

单项选择题

Your network contains a server named Server1 that has the Routing role service installed. Server1 has two network connections. One network connection connects to the internal network. The other network connection connects to the Internet.All network connections connected to the internal network use private IP addresses. You install a Web server named Web1. Web1 hosts a secured Web site that only allows connections over TCP port 8281. Web1 is connected to the internal network.You need to ensure that the secure Web site can be accessed from the Internet.What should you do from the Routing and Remote Access console？（）

A. Configure Routing Information Protocol (RIP), and then activate authentication on the RIP interface.
B. Configure Routing Information Protocol (RIP), and then configure the incoming packet protocol settings on the RIP interface.
C. Configure Network Address Translation (NAT), and then add a new service to the NAT interface.
D. Configure Network Address Translation (NAT), and then enable the Secure Web Server (HTTPS) service on the NAT interface.

点击查看答案进入题库练习

单项选择题

You have a file server that runs windows server 2008. A user restores a large file by using the previous versions tab.You need to view the progress of the file restoration. What should you do?（）

A.From the command prompt, run shadow.exe /v.
B.From the command prompt, run vssadmin.exe query reverts.
C.From computer managerment, click on the shared folders node and then click on sessions.
D.From computer managerment, click on the shared folders node and then click on open files.

点击查看答案进入题库练习

单项选择题

Your network contains two offices named Office1 and Office2. The offices connect to each other by using a demand-dial connection.You add a new subnet in Office2.You need to ensure that a demand-dial connection starts when users attempt to connect to resources in the new Office2 subnet.What should you do from the Remote Routing and Access console？（）

A. From the remote access server in Office2, right-click the demand-dial interface and click Connect.
B. From the remote access server in Office1, right-click the demand-dial interface and click Connect.
C. From the remote access server in Office1, right-click the demand-dial interface and click Update Routes.
D. From the remote access server in Office2, right-click the demand-dial interface and click Update Routes.

点击查看答案进入题库练习

单项选择题

our company has a main office and two branch offices. Domain controllers in the main office host an active directory-integrated zone. The DNS servers in the branch offices host a secondary for the zone. Each branch office has an application server. Users access the application server by using its fully qualified domain name. you need to ensure that users in the branch office can access their local application server even if the WAN links are down for three days. What should you do?（）

A.Increase the expires after setting to 4 days on the start of authority (SOA) record for the zone.
B.Increase the refresh interval setting 0 4 days on the start of authority (SOA) record for the zone.
C.Configure the zone aging / scavenging properties dialog box to enable scavenge state resource records, and set the refresh setting to 4 days.
D.Configure the zone aging / scavenging properties dialog box to enable scavenge state resource records, and set NO-refresh interval setting to 4 days.

点击查看答案进入题库练习

单项选择题

Your network contains a server named Server1. Server1 runs Windows Server 2008 R2 and has a single network connection. The connection is configured to use a default gateway address of 10.0.0.1.The default gateway has a metric value of 100.You configure a second default gateway that uses an address of 10.0.0.2.You need to ensure that 10.0.0.2 is only used as the default gateway if 10.0.0.1 is unreachable. What should you do？（）

A. For the interface, set the interface metric to 100.
B. For the 10.0.0.2 gateway, set the metric to 50.
C. For the 10.0.0.2 gateway, set the metric to 200.
D. For the 10.0.0.1 gateway and the 10.0.0.2 gateway, enable automatic metric.

点击查看答案进入题库练习

单项选择题

You have a DHCP serve that runs windows server 2008. The DHCP serve has two network connections named LAN1 and LAN2. You need to prevent the DHCP server from responding to DHCP client request on LAN2. The server must continue to respond to non-DHCP client requests on LAN2. What should you do?（）

A.From the DHCP snap-in, modify the bindings to associate only LAN1 with the DHCP service.
B.From the DHCP snap-in, create a new multicast scope.
C.From the properties of the LAN1 network connection, set the metric value to 1.
D.From the properties of the LAN2 network connection, set the metric value to 1.

点击查看答案进入题库练习

单项选择题

Your network contains two DHCP servers named Server1 and Server2. Server1 and Server2 are located in the same subnet.You configure a split scope named Scope1 on the DHCP servers.You need to ensure that Server2 only responds to DHCP client requests if Server1 is unavailable.What should you modify？（）

A. the Scope1 properties for Server1
B. the Scope1 properties for Server2
C. the server options for Server1
D. the server options for Server2

点击查看答案进入题库练习

单项选择题

Your company uses network access protection (NAP) to enforce policies on client computers that connect to the network. Client computers run windows vista. A group Policy is used to configure client computers to obtain updates from WSUS. Company policy requires that updates labeled important and critical must be applied before client computers can access network resources. You need to ensure that client computes meet the company policy requirement. What should you do?（）

A.Enable automatic updates on each client.
B.Enable the security center on each client.
C.Quarantine clients that do not have all available security updates installed.
D.Disconnect the remote connection until the required updates are installed.

点击查看答案进入题库练习

单项选择题

our company has a DNS server named server1. Your partner company has a DNS server named server2. You create a stub zone on server1. The master for the stub zone is server2. Serve2 fails. You discover that users are not able to resolve named for the partner company. You need to ensure that users are able to resolve named for the partner company in the event that server2 fails. What should you do?（）

A.Change the stub zone to a secondary zone on server1.
B.Open the SOA record for the zone on server2. Change the minimum (default ) TTL setting to 12 hours.
C.Open the DNS zone for the partner company on server2. Create a new route through (RT) record and a new host (A) record for server1.
D.Open the primary DNS zone on server2. Create a new service locator (SRV) record and a new host (A) record for server1.

点击查看答案进入题库练习

赞题库

赞题库-搜题找答案

（已有500万+用户使用）

历年真题
章节练习
每日一练
高频考题
错题收藏
在线模考
提分密卷
模拟试题

无需下载立即使用

手机版电脑版