单项选择题X 纠错
A.Restart DHCP1.
B.Configure a scope on DHCP1.
C.Activate the scope on DHCP1.
D.Authorize DHCP1 in the Active Directory domain.
你可能喜欢
单项选择题
A.Type ping 172.16.45.9:::::.
B.Type ping ::9.45.16.172.
C.Type ping followed by the Link-local address of the server.
D.Type ping followed by the Site-local address of the server.
多项选择题
A. Install the Routing and Remote Access role.
B. Run the netsh ras ip set access ALL command
C. Run the netsh interface ipv4 enable command
D. Enable the IPv4 Router Routing and Remote Access option
单项选择题
A./61
B./62
C./63
D./64
单项选择题
A. Configure a DHCP relay agent on a member server in the main office
B. Configure a DHCP relay agent on a member server in the branch office
C. Configure the Broadcast Address DHCP server option to include the main offices DHCP server address
D. Configure the Resource Location Servers DHCP server option to include the main offices server ip addresses.
单项选择题
A. Change the IP address to 192.168.46.129
B. Change the IP address to 192.168.46.200
C. Change the subnet mask to a 24-bit mask
D. Change the subnet mask to a 27-bit mask.
单项选择题
A. Configure the IPv6 address as fd00::2b0:d0ff:fee9:4143/8
B. Configure the IPv6 address as fe80::2b0:d0ff:fee9:4143/64
C. Configure the IPv6 address as ff80::2b0:d0ff:fee9:4143/64
D. Configure the IPv6 address as 0000::2b0:d0ff:fee9:4143/64
单项选择题
A.Configure the IPv6 address as fd00::2b0:d0ff:fee9:4143/8.
B.Configure the IPv6 address as fe80::2b0:d0ff:fee9:4143/64.
C.Configure the IPv6 address as ff80::2b0:d0ff:fee9:4143/64.
D.Configure the IPv6 address as 0000::2b0:d0ff:fee9:4143/64.
单项选择题
A.SegmentA:131.107.40.0/23 SegmentB:131.107.42.0/24 SegmentC:131.107.43.0/25 SegmentD:131.107.43.128/27
B.SegmentA:131.107.40.0/25 SegmentB:131.107.40.128/26 SegmentC:131.107.43.192/27 SegmentD:131.107.43.224/30
C.SegmentA:131.107.40.0/23 SegmentB:131.107.41.0/24 SegmentC:131.107.41.128/25 SegmentD:131.107.43.0/27
D.SegmentA:131.107.40.128/23 SegmentB:131.107.43.0/24 SegmentC:131.107.44.0/25 SegmentD:131.107.44.128/27
单项选择题
A. Use DNS manager to delete the 127.in-addr.arpa zone.
B. Run the dnscmd /RecordDelete 10.3.2.127 command at the command prompty
C. Run the dnscmd /ZoneDelete 127.in-addr.arpa command at the command prompt.
D. Run the dnscmd /RecordDelete 10.in-addr.arpa 127.2.3 PTR command at the command prompt.
单项选择题
A.Use a static IPv4 address in the range used at the branch office.
B.Use an alternate configuration that contains a static IP address in the range used at the main office.
C.Use the address that was assigned by the DHCP server as a static IP address.
D.Use an alternate configuration that contains a static IP address in the range used at the branch office.