单项选择题X 纠错
A. E0
B. E1
C. E2
D. E3
E. None of these interfaces will be used to successfully pass the RPF check.
F. All of these interfaces would successfully pass the RPF check.
你可能喜欢
单项选择题
A. Configure RTA as an ASBR
B. Redistribute connected routes on RTA into OSPF
C. Set up a virtual link between area 1 and area 0
D. Set up a virtual link between area 1 and area 2
E. Add a static route into RTB and enter it into OSPF
F. Place a network 1.1.1.0 0.0.0.0 command into RTB
G. Set up a unique router ID on RTA using an RFC 1918 address
H. Change area 0 on RTB to area 1
单项选择题
A.disable Zone-Based Firewall as the two features are not compatible
B.disable Cisco Express Forwarding as the two features are not compatible
C.generate a certificate and export on Cisco.com to receive a signature update
D.import the public RSA key from the Cisco IPS team that allows the router to verify that a signatureupdate (which was signed by this key) comes from Cisco
单项选择题
A. Add the command: router eigrp 1 traffic-share voice interface fast 0/0
B. Reconfigure EIGRP to recognize voice packets
C. Remove the variance from the configuration
D. Reconfigure the VoIP system to use RTP sequence number headers
E. Use an H '323 gatekeeper for your VoIP system to negotiate an H'245 uneven packet buffer
F. Reconfigure EIGRP to version 2
单项选择题
A.show ip pim rendez-vous
B.show ip rpf rp mapping
C.show ip pim rp mapping
D.show ip pim rp info
E.show ip pim
单项选择题
A.it enables PIM BSR
B.it makes the router an Auto-RP mapping agent
C.it advertises the router as an RP with Auto-RP
D.it makes the router an Auto-RP client
单项选择题
A.It will send the join only to the neighbor with the highest IP address.
B.It will send the join only to the neighbor with the lowest IP address.
C.It will send the join in a round-robin fashion across all neighbors.
D.It will send the join to all neighbors.
单项选择题
A.2001:db8:3811::1
B.2001:db8:3811::2323
C.2001:db8:3811::0130
D.2001:db8:3811::3
E.2001:db8:3811::6
多项选择题
A.Flooding paths and redundancy
B.Amount of routing information in the OSPF area or routing domain
C.Number of routers with Cisco Express Forwarding enabled
D.Number of neighbor adjacencies
E.Other routing protocols in use
F.OSPF timer reconstruction negotiation
G.Redistribution with BGP neighbors
H.Redistribution with other IGP routing protocols, such as RIP or EIGRP
单项选择题
A. BGP peers must be Layer 2-adjacent
B. EBGP multihop is not configured
C. The firewall is not configured to allow IP protocol 89
D. The firewall is not configured to allow UDP 179.