多项选择题X 纠错
A.Manchester的串行链路的地址为10.1.1.1
B.Manchester的串行链路的地址为10.1.1.2
C.London路由器是CISCO2610
D.London路由器是CISCO2611
E.路由器Manchester的Serial0/0端口收到CDP信息
F.路由器London的Serial0/0端口收到CDP信息
你可能喜欢
单项选择题
A.access-list10 permit 172.29.16.00.0.0.255
B.access-list10 permit 172.29.16.00.0.1.255
C.access-list10 permit 172.29.16.00.0.3.255
D.access-list10 permit 172.29.16.00.0.15.255
E.access-list10 permit 172.29.0.00.0.255.255
多项选择题
A.complicated header
B.plug-and-play
C.no broadcasts
D.checksums
E.optional IPsec
F.autoconfiguration
多项选择题
A.amount of RAM
B.bridge priority
C.IOS version
D.IP address
E.MAC address
F.speed of thelinks
单项选择题
A.FE08::280e:611:a:f14f:3d69
B.FE81::280f:512b:e14f:3d69
C.FE80::380e:611a:e14f:3d69
D.FEFE:0345:5f1b::e14d:3d69
多项选择题
A.source ip address:192.168.15.5destination port:21
B.source ip address:,192.168.15.37destination port:21
C.sourcei p address:,192.168.15.41destination port:21
D.source ip address:,192.168.15.36destination port:23
E.source ip address:192.168.15.46destination port:23
F.source ip address:,192.168.15.49destination port:23
多项选择题
A.They are always present in the NAT table.
B.They allow connection to be initiated from the outside.
C.They can be configured with access lists,to allow two or more connections to be initiated from the outside.
D.They require no inside or outside interface markings because addresses are statically defined.
单项选择题
A.access-list 10 permit 172.29.16.0 0.0.0.255
B.access-list 10 permit 172.29.16.0 0.0.1.255
C.access-list 10 permit 172.29.16.0 0.0.3.255
D.access-list 10 permit 172.29.16.0 0.0.15.255
E.access-list 10 permit 172.29.0.0 0.0.255.255
单项选择题
A.show chap authentication
B.show interface serial0
C.debug ppp authentication
D.debug chap authentication
E.show ppp authentication chap
单项选择题
A.让students访问Internet
B.阻止students访问RA的命令提示符
C.阻止管理员访问RA的控制台
D.让administrators访问Internet
E.阻止students访问Internet
F.阻止students访问Admin的网络
单项选择题
A.Router# show ip eigrp adjacency
B.Router# show ip eigrp topology
C.Router# show ip eigrp interfaces
D.Router# show ip eigrp neighbors