A.amount of RAM
B.bridge priority
C.IOS version
D.IP address
E.MAC address
F.speed of thelinks

A.FE08::280e:611:a:f14f:3d69
B.FE81::280f:512b:e14f:3d69
C.FE80::380e:611a:e14f:3d69
D.FEFE:0345:5f1b::e14d:3d69

A.source ip address：192.168.15.5destination port：21
B.source ip address：，192.168.15.37destination port：21
C.sourcei p address：，192.168.15.41destination port：21
D.source ip address：，192.168.15.36destination port：23
E.source ip address：192.168.15.46destination port：23
F.source ip address：，192.168.15.49destination port：23

A.They are always present in the NAT table.
B.They allow connection to be initiated from the outside.
C.They can be configured with access lists,to allow two or more connections to be initiated from the outside.
D.They require no inside or outside interface markings because addresses are statically defined.

A.access-list 10 permit 172.29.16.0 0.0.0.255
B.access-list 10 permit 172.29.16.0 0.0.1.255
C.access-list 10 permit 172.29.16.0 0.0.3.255
D.access-list 10 permit 172.29.16.0 0.0.15.255
E.access-list 10 permit 172.29.0.0 0.0.255.255

A.show chap authentication
B.show interface serial0
C.debug ppp authentication
D.debug chap authentication
E.show ppp authentication chap

A.让students访问Internet
B.阻止students访问RA的命令提示符
C.阻止管理员访问RA的控制台
D.让administrators访问Internet
E.阻止students访问Internet
F.阻止students访问Admin的网络

A.Router# show ip eigrp adjacency
B.Router# show ip eigrp topology
C.Router# show ip eigrp interfaces
D.Router# show ip eigrp neighbors

A.A WPA key is longer and requires more special characters than the WEP key.
B.The access point and the client are manually configured with different WPA key values.
C.WPA key values remain the same until the client configuration is changed.
D.The values of WPA keys can change dynamically while the system is used.

A.255.255.255.0
B.255.255.255.240
C.255.255.255.248
D.255.255.255.252
E.255.255.255.254

A.Set the SSID value in the client software to public.
B.Configure open authentication on the AP and the client.
C.Set the SSID value on the client to the SSID configured on the AP.
D.Configured MAC address filtering to permit the client to connect to the AP.