单项选择题X 纠错
A.corrosion on the gears
B.excessive gear speed
C.dirt in the oil
D.misalignment of the gears
你可能喜欢
单项选择题
A.maintain alignment when the ship’s hull is working in heavy seas
B.ensure engine vibrations correspond to the natural frequency of the hull
C.permit the engine to expand away from the driven equipment as the engine heats up and expands
D.maintain engine thrust bearing clearances
单项选择题
A.must churn the oil in the sump
B.is connected to the propeller shaft
C.is driven at the highest RPM
D.compensates for alignment variations between the engine and pinion gear
单项选择题
A.reduce load
B.check your exhaust
C.adjust cooling water temperature
D.increase lube oil flow
单项选择题
A.Lubrication to the defective cylinder should be increased
B.Cooling water temperature to the engine should be increased
C.Only the turbocharger speed should be reduced
D.Engine speed should be reduced
单项选择题
A.incorrect injection timing
B.low exhaust back pressure
C.floating exhaust valves
D.excessive cranking speed
单项选择题
A.electrical overload
B.surging at governed RPM
C.loose engine mounting bolts
D.coolant leaking into the cylinder
单项选择题
A.check the air filter for obstruction
B.check for an exhaust leak
C.check the exhaust temperature
D.secure the engine
单项选择题
A.over-speeding of the engine
B.failure of the engine to shut down
C.no effect of engine mounting bolts
D.high exhaust temperatures
单项选择题
A.low lube oil temperature
B.low starting air temperature
C.air bubbles in the fuel oil system
D.water in the starting air system
单项选择题
A.Low cooling water outlet temperature
B.High lube oil pressure
C.Low lube oil temperature
D.Low starting air pressure