你可能喜欢
单项选择题
A.sludge
B.water
C.micro-organism growth
D.all of the above
单项选择题
A.burned exhaust valves
B.excessive spring compression
C.spring surge
D.worn valve seats
单项选择题
A.worn valve seats
B.worn main bearing
C.excessive valve clearance
D.weak rocker arm springs
单项选择题
A.spark from a plug in the pre-combustion chamber
B.electrical discharge from the distributor
C.heat of compression within the cylinder
D.heat from the fuel injection nozzle
单项选择题
A.engine operating speed
B.an air manifold
C.a hydraulic distributor
D.individual cams and valve gear
单项选择题
A.the air start valve timing gears and rods
B.a cylinder check valve
C.individual cams and valve gear
D.an air manifold poppet valve
单项选择题
A.degree of cylinder air turbulence
B.firing pressure in the engine
C.quality of fuel to be injected
D.duration of the ignition delay period
单项选择题
A.laying a straight edge across the crank webs at the crankpin and measuring the distance to the crankpin in two places
B.measuring the crank drop on either side of each crank throw while the crankshaft is slowly rotated through one revolution
C.rotating the crankshaft through one revolution, pausing each 90oof rotation to measure bearing clearances, top and bottom
D.taking micrometer reading between the crank cheeks opposite the crankpin every 90°of crank angle rotation
单项选择题
A.electronic ignition system
B.compression of air by the piston
C.friction in the fuel injector
D.fuel oil bearing system
单项选择题
A.placed as near the crankpin axis as possible
B.removed each time the crankshaft is repositioned
C.left in place for all four readings
D.reset to zero for all four readings