单项选择题X 纠错
A.corrosion and grooving of exhaust valves
B.corrosion and gumming of the fuel injection pump
C.salt deposits in the exhaust manifold
D.slag deposits in the fuel injection equipment
你可能喜欢
单项选择题
A.clogged fuel injection pumps
B.increased cylinder liner wear
C.intake valve stem corrosion
D.varnish deposit on pistons
单项选择题
A.Injection lag
B.Lube oil dilution
C.Pre-ignition
D.Corrosion
单项选择题
A.increase thermal efficiency
B.cause clogging of the fuel system
C.increase the ability of the engine to start in cold weather
D.produce corrosion in the cylinder and exhaust system at low loads
单项选择题
A.the engine to run after the fuel has been secured
B.the engine to over-speed
C.a fire
D.all of the above
单项选择题
A.compression pressure in the cylinder will be higher
B.carbon will accumulate behind the ring
C.combustion gases will penetrate beneath the ring land
D.piston side thrust will be increased
单项选择题
A.copper
B.carbon
C.hydrogen
D.sulfur
单项选择题
A.The cylinder indicator cocks should be opened
B.The sump lube oil scavenge pump should be secured immediately
C.The explosion relief valves should be manually opened
D.The crankcase should remain unopened until the engine has cooled
单项选择题
A.turbocharger malfunction or failure
B.crankcase exhauster overload
C.overload on the intercooler
D.obstruction in the engine cylinders
单项选择题
A.inspection covers should not be opened until the engine has cooled
B.ventilation system should be continued in operation for one hour for cooling
C.scavenge pump should be immediately secured to prevent loss of lube oil
D.explosion covers should be opened slightly to provide extra ventilation
单项选择题
A.high flash point and high viscosity
B.low flash point and high viscosity
C.low heating value and high sulphur content
D.high heating value and low sulphur content