A.Compound gage
B.Bonrdon tube
C.Manometer
D.Deadweight gage

A.cavitation
B.water hammer
C.fluid friction
D.steam knock

A.sub-cooled liquid
B.high temperature liquid
C.oil saturated liquid
D.superheated vapor

A.Reciprocating
B.Centrifugal
C.Rotary
D.Gear

A.change in the impeller diameter
B.square of the impeller radius
C.cube of the impeller diameter
D.impeller efficiency for large changes in its size

A.As pressure decreases, volume increases
B.As volume increases, pressure increases
C.As volume decreases, pressure decreases
D.As pressure increases, volume increases

A.readjust the relief valve
B.throttle the suction line
C.throttle the discharge valve
D.open the priming line

A.transmitter at the steering station and a receiver at the steering engine
B.reversible motor at the steering station geared to the steering pumps
C.small induction motor on the bridge which controls the redder through pulleys
D.variable displacement hydraulic pump driven by a reversible DC motor

A.Distiller air ejector cooling medium
B.Saltwater heater discharge
C.First-stage internal feed box
D.Second-stage internal feed box

A.condenser
B.vapor generator
C.accumulator
D.evaporator

A.expansion valve to the compressor
B.receiver to the expansion coil
C.expansion valve to the evaporator
D.condenser to the expansion valve