A.the flashing of the feed water
B.the condensation of the saltwater feed
C.air ejectors, eductors, or a separate vacuum pump
D.condensation of the distillate

A.under heavy loads
B.during hot gas defrost
C.under light loads
D.during starting conditions

A.Excessive compression in the cylinder
B.A broken intake valve
C.A dirty inlet filter element
D.An improperly adjusted discharge valve

A.Constant tension mooring winch system
B.Hatch cover system
C.Watertight door system
D.Internal combustion engine hydraulic starter system

A.Carbon build up in the piston ring belt
B.Faulty operation of a cylinder un-loader
C.Compressor operation in an area of high relative humidity
D.Lifting of intercooler rebel valve

A.system was overcharged with refrigerant
B.system was low on refrigerant
C.suction valves were leaking slightly
D.relief valve was leaking slightly