A.(1) only is correct
B.(2) only is correct
C.both (1) and (2) are correct
D.Neither (1) or (2) are correct

A.water
B.babbitt
C.iron or steel
D.acids

A.Impurities
B.Lube oil
C.Gasoline
D.Diesel fuel

A.moisture
B.dirt
C.acid
D.air

A.relieve excess fuel oil pressure during the “off” fire cycle
B.admit water to the dry pipe
C.throttle the forced draft fan output for proper combustion
D.reduce excess steam pressure in the boiler

A.60 to75
B.80 to 95
C.100 to 115
D.120 to 135

A.heat conduction into the injected fuel oil
B.heat conduction into the water jacket wall
C.water circulation through passages in the holder
D.fuel oil circulation through passages in the holder

A.slightly acidic condition
B.slightly alkaline condition
C.overtreatment of water
D.neutral condition of water

A.Combustion gases flow through the tubes
B.Flames impinge on the tubes
C.Combustion occurs in the tubes
D.Water flows through the tubes

A.slight acidity
B.slight alkalinity
C.excessive alkalinity
D.excessive acidity

A.cold corrosion of the nozzles
B.fuel viscosity for better atomization
C.carbon accumulation on the nozzles
D.fuel detonation in the cylinders