IBM(000-180)章节练习(2019.05.07)

单项选择题
Companycom is about to purchase a POWER5 Enterprise server which requires two Ethernet ports and two disks for each of the four LPARs. It has been configured and validated using the IBM eConfig tool.Which of the following is very important to verify in addition to the eConfig validation?（）
A.Total number of SCSI adapters
B.Total number of Ethernet adapters
C.Total number of Ethernet adapters and number of SCSI paths per LPAR
D.Total number of SCSI paths available and total number of SCSI adapters
单项选择题
Companycom has seven days of vmstat data on a p5 590. The server has a total of four test/dev LPARs and 4 production LPARs of one processor each. On the four test/dev LPARs, the data shows 90-95% peak utilizations with a duration of from 5 to 10 minutes. The average utilizations of all LPARs were between 15-30%. All of the applications have different times when they peak. What is the best configuration to fully utilize the processor resource?（）
A.Set up the server in SMP mode and use WLM to manage resources effectively
B.Set up eight dedicated LPARs and use DLPAR to manage resources effectively
C.Set up a shared pool with eight capped LPARs including production and test/dev
D.Set up a shared pool with eight uncapped LPARs with priority weight to Production
单项选择题
Companycom LPAR that is using a Virtual IO Server needs to be more highly available. How can this be accomplished using APV features?（）
A.Reallocate the Virtual IO Server disks to the user LPAR
B.Create a stripe-group within the Virtual IO Server to protect against disk failure
C.Reconfigure the user LPAR to use both locally owned disk and a Virtual SCSI disk
D.Create a second Virtual IO Server and reconfigure the user LPAR to mirror across both Virtual IO Servers
单项选择题
Companycom has a p5 590 that has their production LPAR, their Tivoli Storage Manager (TSM) LPAR, and several other LPARs.What method would provide connectivity between the production LPAR, and the TSM LPAR, but be isolated from the other LPARs in the system without utilizing a Virtual IO Server or physical adapter resources?（）
A.Use shared memory and semaphores to transfer the data to the TSM LPAR
B.Provide gigabit Ethernet adapters in each LPAR and run a crossover cable
C.Create a Virtual Ethernet between the production server and the TSM LPARs
D.Create a Virtual Ethernet between the TSM server LPAR and the non-production LPARs
单项选择题
When configuring Micro-Partitioning into shared processor partitions, what limitations should be considered?（）
A.Shared processors never affect AIX 5L affinity management.
B.Shared processors can only be implemented with AIX and not with Linux or i5OS.
C.A mix of dedicated and shared processors within the same partition is supported.
D.A mix of dedicated and shared processors within the same partition is not supported.
单项选择题
A client has tried to update the firmware of an Ethernet adapter on a p5 590, however it repeatedly fails. What is the most likely cause of this problem?（）
A.The adapter must be taken offline prior to the firmware update
B.The adapter must be assigned to the service partition prior to the firmware update
C.The system has not been rebooted since the adapter was added to the Logical Partition
D.The adapter must be dynamically removed from the Logical Partition prior to the firmware update
单项选择题
Companycom is considering a large partitioned p5 590 to consolidate several smaller systems in their data center. Due to the complexity of the consolidation, the customer is asking the technical support specialist to give them a report which shows pre order PCI adapter placement and validates them against IBM's recommendations. The concern is that the factory will not install the adapters in the appropriate slots as the customer pre-selected.What IBM tool is available to provide this?（）
A.LPAR Validation Tool （LVT）
B.Personal Systems Configurator （PSC）
C.IBM Configuration for eBusiness （eConfig）
D.Advanced System Management Interface （ASMI）
单项选择题
A system administrator had a disk failure on an HMC. The disk was replaced and the HMC was loaded from the Product Recovery CD. The system administrator had performed a backup to DVD of the HMC data before the system failed. After restoring the backup files, it was noticed that no profile files were restored.What is the most likely cause of this problem?（）
A.The profile data was not initialized after restoring the backup CD
B.The profile data was not backed up before doing the Critical Console Data backup
C.A Critical Console Data backup was performed which backs up user data， but not profile data
D.A Save Upgrade data was done instead of a backup Critical Console Data and the profile files were not included
单项选择题
Companycom currently has three p650 servers in their environment and they are implementing a p5 595. The p650 servers are running in an SMP environment, but are connected to a pair of HMCs.In order to follow best practices in the enterprise server environment and maintain HMC connectivity to the p650s, what else will needs to be ordered in addition to the p5 595?（）
A.Include a new HMC in the order to connect to the p5 595
B.Include a pair of new HMCs in the order to connect to the p5 595
C.Include a media set for POWER5 HMC in the order to upgrade one of the existing HMC’s to POWER5 capabilities
D.Include a media set for POWER5 HMC in the order to upgrade both of the existing HMC to POWER5 capabilities Include a media set for POWER5 HMC in the order to upgrade both of the existing HMC? To POWER5 capabilities
单项选择题
Companycom is currently using a p690 and has just ordered a p5 590. They prefer to run in full system partition mode, since their application will utilize all the resources in the machine, and they don't want the overhead of an LPAR.What is the best response to the customer about the POWER5 capabilities?（）
A.POWER5 runs in an SMP mode as default
B.POWER5 can run in a full system mode the same as the p690
C.POWER5 can run in full system mode with the purchase of PLM
D.POWER5 can run in a full system mode， but it is in LPAR mode