IBM认证考试IBM(000-087)章节练习(2019.04.23)

单项选择题
Which bays do the Multi-Switch Interconnect Module populate? （）
A.3 and 4
B.3, 4, 5, and 6
C.7 and 9
D.7, 8, 9, and 10
单项选择题
A customer is consolidating their ten rack mount Windows servers into a VMware environment with four servers. The existing servers all have internal disk. The total amount of useable capacity is 5TB which is expected to increase to 10TB over the life of this asset. The customer will want to use the advanced features of VMware like VMotion.The customer is concerned about cost. Which of the following meets the customers needs? （）
A.DS3500 with SAS Host Connection
B.DS3500 with iSCSI Host Connection
C.DS3500 with FC Host Connection
D.DS5020
单项选择题
An eX5 client is concerned about the cost-per-GB of the proposed SAS disk-based solution, and suggests using SATA disk technology in order to reduce costs for their 24x7 mission-critical Microsoft SQL Server application. Which of the following addresses the customer issues?（）
A.SAS drives support automatic rebuild upon failure, SATA must be rebuilt manually
B.SAS drives support Fibre Channel attachment to eX5 servers, SATA does not
C.SATA drives require different, more expensive cables, and require more floor space compared with SAS
D.SATA storage is slower, has lower mean time between failure, and designed for a lower duty cycle compared with SAS
单项选择题
A customer is considering iDataPlex and several competitive solutions. Which of the following favor iDataPlex?（）
A.Lowest cost of acquisition
B.Useable density
C.Flexible configurations ready for integration and testing at the customers data center
D.Standard rack mounting
单项选择题
A customer has a BladeCenter H chassis with a single AMM. The AMM is defective. Which of the following is the method to backup the existing AMM so the new AMM automaticlally picks up the configuration? （）
A.Back up the AMM configuration to a file
B.Back up the AMM configuration to the chassis
C.Back up the AMM using IBM Systems Director
D.Back up the AMM using Tivoli Storage Manager
单项选择题
A customer has downloaded new firmware files for the IBM support Web Site. Which of the following is the correct method for updating the firmware for the QLogic Intelligent Passthru Module using the command line?（）
A.Transfer the file to the FC module using FTP； use Telnet to the FC module to start the update
B.Use Telnet to the AMM to transfer the file using TFTP； start the update
C.Transfer the file to the FC module using Secure Copy Protocol （SCP）；use Telnet to the FC module to start the update
D.Start the update and enter FC module IP address when prompted
单项选择题
A medical customer has a rack with four BladeCenter H chassis that have been operating normally for several months. After installing a new rack of servers in the data center, the system administrator notices the blowers in the BladeCenters have increased their speed. Which of the following caused this problem? （）
A.The room temperature has reached 23C (73.4F).
B.A Blade within the chassis has been shut down.
C.The ambient temperature in the data center has increased
D.One of the additional System X servers in the BladeCenter rack has failed.
单项选择题
How many BladeCenter HT chassis will fit in a standard 19" 42U rack?（）
A.2.
B.3
C.4
D.6
单项选择题
A retail customer has a database application that is accessed by a large number of people through a web interface from multiple remote locations. Which of the following questions will provide the information necessary to design the best performing storage solution?（）
A.How many web servers will be connected to the database?
B.How many concurrent applications will run against the database?
C.How many concurrent users will be accessing the database?
D.What are the types of transactions run against the database?
单项选择题
A medical customer has an installed HS21 blade with no local disk. They are attempting to set up boot from SAN using a Windows 2003 CD. Which sequence is correct for this procedure? （）
A.Install Windows from the CD using the QLogic driver provided on the CD, configure the LUN and zone for the target server, and then configure the blade UEFI to boot from SAN.
B.Configure the LUN and zone for the target server, install Windows from the CD and press F6 when prompted to supply the driver, and then configure the QLogic adapter BIOS to boot from SAN.
C.Configure the LUN and zone for the target server, configure the QLogic adapter BIOS to boot from SAN, install Windows from the CD, and then press F6 when prompted to supply the driver.
D.Configure the blade UEFI to boot from SAN, configure the LUN and zone for the target server, and then install Windows from the CD using the QLogic driver provided on the CD