A.A SAN device
B.First I/O drawer
C.Any I/O drawer within the main frame
D.First I/O drawer within the expansion frame

A.A 24 way p5 595 with 3 LPARs
B.A 24 way p5 595 with 2 LPARs
C.One p5 570s 16 way and one p5 570 8 way
D.One p5 595 12 way active and 12 way inactive， and one p5 570 8 way

A.Restart the rsct and inetd daemons
B.Customize the node setting in /etc/services
C.Rename the rootvg filesystems to their original names
D.Customize the node_id file and restart the rsct daemons

A.Daisy chain the unsupported 3rd party storage subsystem devices with the local SCSI disk drive 
B.Assuming the 3rd party storage subsystem has AIX support, enable access through a Virtual IO Server 
C.Assuming the 3rd party storage subsystem has AIX support, implement the Linux partition within an AIX partition 
D.3rd party storage is not an option for p5 570 servers and therefore only IBM disk subsystems can be considered as a solution

A.multiple partitions that share the processing power of a set of physical processors where a partition can be assigned as little as 1/2 of a physical processor's resource. 
B.multiple partitions that share the processing power of a set of physical processors where a partition can be assigned as little as 1/100th of a physical processor's resource. 
C.an advanced virtualization feature of POWER5 systems with Linux (SUSE and Red Hat for POWER) and AIX 5L Version 5.3 that allows multiple partitions to share the processing power of a set of physical processors. 
D.an advanced virtualization feature of POWER5 systems with Linux (SUSE and Red Hat for POWER) and AIX 5L Version 5.2 or 5.3 that allows multiple partitions to share the processing power of a set of physical processors.

A.Dedicated and never Virtual processors are used in Virtual IO Servers partitions
B.Dedicated processors are whole processors that are assigned to a single partition
C.Dedicated processors are fractions of whole processors that are dedicated to a single  partition
D.Dedicated and Virtual processors are interchangeable concepts, both are whole physical  processors used in virtual and dedicated LPARs

A.An additional 7311-D10 drawer
B.An adapter to boot off a SAN device
C.An additional disk to the media bay
D.Two disks to the internal configuration

A.Create a mksysb backup of the original and restore it to the new partitions
B.Use NIM to load the additional partitions from an image of the original partition
C.Create alt_disk_install clones of the original partition and assign the target disks to the new partitions
D.Use the split mirror function to split off additional copies of the original partition and assign them to the other partitions

A.The server must be installed into a location with a raised floor for optimum system cooling  and cable management.
B.The server should be purchased as a p5 590 and then upgraded to a p5 595. This will eliminate the need for a raised floor environment.
C.The server should be purchased as 32-way p5 595 and then upgraded to a 64-way. This will eliminate the need for a raised floor environment.
D.The server can be installed into a location without a raised floor if an RPQ is obtained. It is a strong IBM recommendation for a raised floor, not a requirement.

A.Enable DHCP server on the HMC
B.Configure host name and IP address on DNS server
C.Manually set the IP address of the service processor
D.Connect a RS-232 cable from the HMC to the service processor

A.Resources cannot be shared with an i5 partition when it is put on a pSeries. The i5 partition needs its own 9411-100 tower because of IOP. V5R3 OS or later is required. There is a maximum of two partitions in a 590.
B.Resources cannot be shared between partitions when i5/OS is put on a pSeries. The i5 partition needs its own 9411-100 tower because of IOP. i5/OS can be at V5R2 or a V5R3. Currently only one i5 partition is allowed. 
C.V5R3 is required for the i5 partitions. Virtual IO Server is not supported for the i5/OS partitions to share storage. Up to 10 i5 partitions per processor are allowed (a maximum of two processors for up to 20 partitions). 
D.Processor and memory resources can be shared between AIX 5L, Linux and i5/os partitions. i5/OS needs to be at V5R3, and Virtual IO Server is not supported for the i5/OS partition to share storage. On a 1.65 GHz POWER5 p5 590 there is a maximum of one partition.