单项选择题X 纠错
A.pay attention to operating parameters
B.renew and clean separating units in time
C.check oil level in separator to prevent overload
D.check separating effect, if it is bad, flush with large capacity water pump
你可能喜欢
单项选择题
A.overhauling every two year
B.working at intervals
C.renewing filtration material
D.pumping bilge water from different layers respectively
单项选择题
A.working at intervals and properly heating
B.warming up to 70℃, increase water supply flow
C.improving impulse of water supply
D.reducing water supply flow
单项选择题
A.flushing separator with hot water
B.increasing water supply flow
C.heat oily water properly
D.opening manual oil discharge value
单项选择题
A.the separator is overload
B.the monitor equipment of separator fails
C.the discharge pump of separator can not work
D.the temperature of oil water is low
单项选择题
A.15;inlet value
B.15;inlet and outlet value
C.30;inlet value
D.30;inlet and outlet value
单项选择题
A.filled with bilge water
B.filled with oil
C.filled with clean water
D.be emptied
单项选择题
A.the sensor of low oil level is fully covered by sludge
B.the coarse strainer before the pump in suction system is clogged
C.the screw pump is worn seriously and volumetric efficiency is decreased
D.bilge suction value is clogged
单项选择题
A.the filter is clogged
B.bilge suction value is clogged
C.suction value and discharge value of the pump do not open fully
D.screw pump is worn seriously and volumetric efficiency is decreased
单项选择题
A.separating oil too fast
B.the sensor flushed badly
C.the discharge solenoid value out of order
D.too low heating temperature
单项选择题
A.the monitoring equipment is out of order
B.separating effect becomes bad
C.inner wall is contaminated
D.separating effect becomes bad and inner wall is contaminated