CCNP系列认证CCNP(642-845)多项选择题每日一练(2019.03.22)

A. Business-critical traffic will be sorted into two QoS classes.
B. Real-time traffic will be sorted into one QoS class.
C. Voice traffic will be considered real-time traffic while call signaling will be considered business-critical.
D. All traffic except real-time will be considered best-effort.
E. Routing， management， and transactional traffic will be considered business-critical.
F. Voice and call signaling traffic will be considered real-time.

A.On each router， under the dial-peer voice 1 pots configuration， add the port fa0/0 command.
B.On each router， under the dial-peer voice 1 pots configuration， add the port 1/0/0 command.
C.On each router， configure dial-peer voice 1 as a voip connection and configure dial-peer voice 2 as a pots connection.
D.Under the dial-peer voice 1 pots configuration， change the destination pattern of 1111 to 2222 on the R1 router， and 2222 to 1111 on the R2 router.
E.Under the dial-peer voice 2 voip configuration， change the destination pattern of 1111 to 2222 on the R1 router， and 2222 to 1111 on the R2 router.
F.Under the dial-peer voice 2 voip configuration， change the destination target address of 10.2.2.2 to 10.1.1.1 on the R1 router， and the destination target address of 10.1.1.1 to 10.2.2.2 on the R2 router.

A.WCS
B.WLSE
C.WLC
D.WDS
E.LWAPP

A. connects traditional telephony devices to voice over IP infrastructure
B. converts analog signals to digital format
C. performs voice compression
D. performs call processing
E. performs dial plan administration
F. performs signaling and device control

A.over leased lines， use the multilink ppp command to reduce latency and jitter， and to create Distributed Link Fragmentation and interleaving
B.use the service-policy command to attach a traffic flow to an interface on the router
C.use the ip rsvp bandwidth command to set a strict upper limit on the bandwidth NBAR uses， and to guarantee admission of any flows
D.use the policy-map command to define one or more QoS policies （such as shaping， policing， and so on） to apply to traffic defined by a class map
E.use the random-detect dscp command to modify the default minimum and maximum thresholds for the DSCP value
F.use the class-map command to define one or more traffic classes by specifying the criteria by which traffic is classified